Enterprise Information
How to carry out gas wall-mounted boiler maintenance
Release time:
2022/05/24 09:07
In the past, what problems often occur during the use of gas wall-mounted boilers? How to judge whether the gas wall-mounted boilers have reached the maintenance time? Today we will talk about the precautions for the maintenance of gas wall-mounted boilers. After the gas wall-mounted boiler fails, the user can unplug the wall-mounted boiler power plug and close the gas main valve to ensure safety. Today, multimedia is developing rapidly. Under the guidance of professionals, users can carry out simple maintenance of gas wall-mounted boilers through WeChat and other multimedia, such as leakage detection of gas circuits and heating systems. In addition, users should trust official website and are not allowed to call and repair unidentified gas wall-mounted boilers without authorization. Deal with bills to prevent future disputes; Find a good after-sales service to replace the new machine. For construction personnel, in the specific process of gas wall-mounted boiler maintenance, they should also fully understand the design and installation specifications of the overall heating system, and according to the performance characteristics of the product, popularize daily maintenance instructions for users, and take into account the user's usage habits. User use. Let's take a look at the maintenance method of gas wall hanging boiler: 1. The maintenance method of gas wall hanging boiler. 6. Control equipment failure. Gas boiler maintenance method: replace the control equipment. 7. The flame sensing needle does not touch the flame. Maintenance method: Adjust the flame sensor needle to a position where it can reach a large or small fire.
Miura boiler: gas boiler is better than the general boiler three prominent characteristics
Release time:
2022/05/24 09:07
With the development of science and technology, more and more consumers use Sanpu boiler industrial equipment, but many consumers do not understand the cost-effectiveness of Sanpu boiler industrial equipment. According to the comprehensive comparison of Sanpu boiler well-known brand industrial equipment and old consumers Satisfaction reviews, summarize the three outstanding characteristics of Sanpu boiler industrial equipment that is better than general boilers.
Sanpu boiler is better than the general boiler three prominent characteristics
1. Low carbon environmental protection
The treatment rate of hazardous waste water in Sanpu boiler is far lower than that in general boilers. The finished product inspection specification conforms to the actual national green ecological environment protection organization specification. It is because the vast majority of such industrial equipment uses pure imported burners, and electronic components are selected for full-automatic ignition, full-automatic ignition, full-automatic fire break, and the characteristics are very stable. Therefore, the expected ignition target is very good, the organic waste gas composition is extremely low, and oxygen is caused during the operation of Sanpu boiler.
Miura boiler: this basic knowledge of the boiler you know?
Release time:
2022/05/24 09:07
In our daily life, Sanpu boilers, biomass fuel steam boilers and other boilers are very common, but do you know the basic knowledge of this kind of boiler? Let us master it together:
1. Sanpu boiler should be repaired?
For the Sanpu boiler, it is necessary to carefully complete and carry out its maintenance work to increase its service life and improve the efficiency of the boiler.
On the Sanpu boiler, if there is running, emitting, dripping, leakage, etc., it should be removed immediately. For some exposed gate valves, stuck anchor bolts and other thematic activities, regular maintenance should be carried out, whether to give oil. Also, to prevent bite problems. In addition, the external environment of the boiler is tested at least once a year.
2. Sanpu boiler is environmental protection and energy saving boiler?
From
Miura boiler: the application of boiler must check the safety hazards?
Release time:
2022/05/24 09:07
If we use the Miura boiler, if we feel that some wrong areas must be stopped immediately and checked. Otherwise, once a safety accident occurs, the adverse effects will be very serious. What security risks should we eliminate?
1. Safety risks of operating and igniting system software
1) Internal leakage of the burner: If there is leakage in the burner valve, the leakage measuring instrument equipped with the burner is invalid, or the burner is not equipped with a leakage measuring instrument at all, and flammable gas enters the furnace, once ignited, it will cause the furnace to explode. This is one of the key reasons for the explosion of the Miura boiler.
2) Insufficient ignition: The combustion of natural gas caused by poor operation of the air-fuel ratio of the burner will not cause CO poisoning in the clinic of the steam boiler room.
3) Empty
What are the advantages of modular boilers over condensing boilers?
Release time:
2022/05/24 09:07
The energy saving of modular boiler has been paid much attention. Compared with the module boiler, the price of the module boiler is cleaner, environmentally friendly and easy to operate, but the cost is slightly higher than that of the module boiler. What are the advantages of modular boilers?
First of all, the module boiler does not require coal ash stacking and saves land
The second is to save the auxiliary production water of the condensing boiler. The normal production water of the condensing boiler and the module boiler may not be much different, but the module boiler saves the auxiliary water used by the module boiler for dust removal and slag removal.
Third, layoffs. Module boilers require less auxiliary equipment than condensing boilers, fewer employees, and fewer wages and expenses.
Four is to save the condensing boiler production electricity. The condensing boiler has few auxiliary equipment such as fuel transportation, low power, short continuous operation time, low power consumption and low cost.
&nbs
How to carry out gas wall-mounted boiler maintenance
Release time:
2022/05/20 14:46
What is the maintenance method of the gas wall-mounted boiler? Everyone has their own set of principles when choosing heating tools. Gas wall-mounted boilers are very popular in heating tools. The wall hanging furnace is actually the abbreviation of the gas wall hanging furnace. The indoor temperature controller can be externally connected to better control the temperature and achieve the purpose of energy saving. Then, let us briefly understand the maintenance method of gas wall-mounted boiler.
Release time:
2022/05/20 14:44
Do you know the difference between electric wall-mounted boiler and gas wall-mounted boiler? Then, the editor of electric wall-mounted boiler will give you a brief introduction. Use energy to distinguish between gas boiler using natural gas, electric boiler using electricity. From everyone's understanding of the use of large electrical appliances, we all know that great power is common sense. When large appliances work, the instrument will rotate significantly! At the same time, if there are too many household appliances, keeping the electric furnace working 24 hours a day will seriously affect the power grid and easily cause safety accidents.
Inventory full premixed advantages of wall hanging furnace?
Release time:
2022/05/20 14:44
Today, many cities have begun to use full premixed wall-mounted furnace equipment. Compared with previous products, it has more advantages, and many people may not know it, so today Xiabian will give you a brief introduction. If you are interested, continue reading. The application of fully premixed wall-mounted boilers is also very extensive, and there are more advantages in use, such as energy saving and environmental protection. Frequency conversion control heat output is more accurate. Compared with traditional cast aluminum heat exchangers, much less materials are used in production, which saves a lot of costs for enterprises. After the test, its service life is the same as that of the cast aluminum heat exchanger.
The use of full premixed wall hanging furnace need to pay attention to matters?
Release time:
2022/05/20 14:44
The full premixed wall-mounted boiler is a new type of product that has appeared in recent years. It has been liked by many people. It is an independent heating heat output device with many functions. When in use, it can be set according to the demand. Comfortable temperature, but there will also be some things that should be paid attention. The following small series for everyone to do a detailed introduction.
Condensing module furnace: What is the working principle of condensing module furnace?
Release time:
2022/05/20 14:44
In winter, people think of it first. Many people are afraid of the coming of winter because they cannot keep warm. Now, with the development of science and technology and the improvement of people's living standards, heating seems to be no longer a popular problem. However, how much do you know about condensing mold furnaces for our closely related heating sources?
Service Hotline:
Email:changsheng@cs-daoju.com
WhatsApp：+86 13570892216
+8613712508118
Company switchboard:0769-22719860
Sweep identification browse:
Mobile website